PUMPS CS

Radially split single-stage pump with axial inlet and radial impeller. Lever, cantilever or vertical design.

CS 1

Horizontal, lever, radially split single-stage pump with axial inlet and radial impeller. Designed for removal of the rotor assembly with the bearing bracket without disrupting the flange connections of the suction and discharge flanges. Basic version with closed impeller and grease lubrication. Seal chamber designed for installation of compressed seals, mechanical seals, folded or cassette structures, including the installation of a double seal.

ISO 5199, EU directive ATEX 2014/34/EU

  • Q max = 4500 m3/h
  • H max = 360 m
  • T max = 160 °C

Applications

The pump is used in basic pumping applications for water, chemical or volatile media, demanding/heavy duty chemical and petrochemical plants and power plants. Pumping low-percentage suspensions, in the food industry and biofuel production. Suitable for high temperature media not exceeding 160 °C.

Modifications

Semi-open or open impeller
Oil lubrication
Cooled / heated seal chamber
Cooled / heated casing of the bearing console
Seals according to API682
Inducer

CS 2

Horizontal, radially split single-stage pump with axial inlet and radial impeller. Cantilever design with pump in shaft axis. Designed for removal of the rotor assembly with the bearing bracket without disrupting the flange connections of the suction and discharge flanges. Pump design in accordance with API 610-OH2. Bearings lubricated with oil bath. Seal chamber designed for the installation of mechanical cassette seals according to API 682. Bearing bracket equipped with ribs for intensifying heat transfer.

API 610/ISO 13709, ISO 5199, EU directive ATEX 2014/34/EU

  • Q max = 4500 m3/h
  • H max = 360 m
  • T max = 450 °C

Applications

Pumps are used in the most demanding chemical and petrochemical plants and power plants. It is a typical pump for use in cracking systems. Designed for high temperature media up to 450 °C.

Modifications

Additional fan/ventilator for the bearing console
Cooled / heated seal chamber
Cooled / heated casing of the bearing console
Inducer

CS 3

Vertical, radially split pump with closed radial impeller. „IN-LINE“ design. Designed with bearing bracket or impeller shaft directly connected to the electric motor shaft. The product line is manufactured with a standard impeller or dual-flow impeller concept. Grease lubrication. Seal chamber designed for installation of compressed seals, mechanical seals, folded or cassette structures, including the installation of a double seal.

ISO 5199, EU directive ATEX 2014/34/EU

  • Q max = 380 m3/h
  • H max = 150 m
  • T max = 120 °C

Applications

The pumps are used in plants with a complex layout due to minimal floor space. Closed cooling systems in power plants, remote heating, industrial water circulation, pumping water or mildly aggressive media and other media.

Modifications

Bearing bracket design
Pump shaft connected directly to the motor
Dual flow impeller